CH80 Stone Water Recycling System

CH80 Stone Water Recycling System

The CH80 Stone Water Recycling System recycles wastewater that is produced by stone fabrication shops. This recycling system handles multiple parts of the water clarification process using a variety of water treatment techniques.

The CH80 performs granite wastewater recycling as well as mud sludge collection through the multi-step treatment of wastewater that comes from the granite fabrication process. This granite wastewater clarification system transforms the slurry from the stone fabrication process into clear water that can then be reused in the granite fabrication process. By recycling the water used in the fabrication shop, stone & granite fabricators realize a tremendous savings in the cost of supplying water to a granite or marble fabrication shop.

Slurry Separation

This water clarifying system makes use of a water filtration cycle to produce clean water from slurry in stone fabrication shops. It does this by separating the slurry into two parts. By filtering out the stone mud and circulating the water through the system, the water is reused repeatedly and stone particles that are filtered out, are stored in a holding bin.

Reducing Water Costs In Stone Fabrication

The CH80 stone water recycling system uses the processes mentioned above to allow reuse of waste water by stone fabricators. One fabrication professional reported a 93% reduction in his water utility after installing a water treatment plant.

• 1,717 Gallons Per Minute
• 26.25′ Unit Diameter
• 57.41′ Unit Height
• 138,162 Gallon Tank
• AS 1000/20P

Multiple Water Treatment Solutions

There are a number of large water clarification solutions available. The following table enumerates the various sizes of water recycling systems provided.

Availability