CH30 Concrete Slurry Recycling

264 GPM Concrete Slurry Recycling

CH30 Concrete Slurry Recycling Plant

The CH30 Concrete Slurry Recycling Plant processes wastewater and recycles it to clear water for reuse. This system handles multiple parts of the water clarification process using a variety of water treatment techniques.

The CH30 performs stone wastewater clarification as well as sludge dehydration through the multi-step treatment of wastewater that comes from the granite fabrication process as well as the concrete industry. This stone wastewater system transforms the slurry from stone fabrication into clear water that can then be reused in the granite fabrication process. By recycling the water used in the fabrication shop, stone fabricators realize a tremendous savings in the cost of supplying water to a granite or marble fabrication facility.

Slurry Separation

This water recycling system for granite fabrication makes use of a water filtration cycle to produce clean water from slurry in stone fabrication shops. It does this by separating the slurry into two parts. By filtering out the stone mud and circulating the water through the system, the water is reused repeatedly and stone particles that are filtered out, are stored in a holding bin.

Reducing Water Costs In Stone Fabrication

The CH30 water recycling system for granite fabrication uses the aforementioned processes to allow stone fabricators to reuse wastewater. One fabrication professional reported a 93% reduction in his water utility after installing a water treatment plant.

  • 264 Gallons Per Minute
  • 9.84′ Unit Diameter
  • 27.88′ Unit Height
  • 9,510 Gallon Tank
  • AS 630/8P Filterpress

Multiple Water Treatment Solutions

There are a number of large water recycling solutions available. The following table enumerates the various sizes of water clarification systems provided.

Large Plant Technical Specifications
Model Rate Diameter Total Height Total Volume Filter Press
CH25 211 gpm 8.20′ 24.5′ 5,283 gal. AS 500/8P
CH30 264 gpm 9.84′ 27.88′ 9,510 gal. AS 630/8P
CH35 396 gpm 11.48′ 29.5′ 13,208 gal. AS 630/8P
CH40 528 gpm 13.12′ 29.5′ 17,435 gal. AS 630/15P
CH45 660 gpm 14.76′ 31.17′ 22,718 gal. AS 800/10P
CH50 792 gpm 16.40′ 34.45′ 29,058 gal. AS 800/15P
CH55 925 gpm 18.04′ 37.73′ 36,191 gal. AS 800/20P
CH60 1,189 gpm 19.69′ 45.93′ 59,174 gal. AS 800/20P
CH65 1,453 gpm 21.33′ 49.21′ 70,798 gal. AS 1000/20P
CH80 1,717 gpm 26.25′ 57.41′ 138,162 gal. AS 1000/20P

Availability

Filter Project Italy

Leave a Reply

Your email address will not be published. Required fields are marked *