9.61 Foot Automatic Dry Dust Collector – TEC714 Auto Cleaning
The TEC714 Automatic Cleaning Dry Dust Collector removes dust from the shop work environment. Get the advantage of removing potentially harmful dust from the work environment in your fabrication shop through the use of equipment that draws the dust particles out of the breathable air and deposits them into containers for removal; either manually or automatically.
This automatic cleaning dry dust collector removes air born dust from the fabrication work area. It measures 115.35″ x 43.31″ x 96.46″. Additionally, the TEC714 is constructed with durable and sturdy stainless steel. It also removes 99.99% of the dust particles in the workspace of the fabricator. This is even more important now that OSHA is increasing the requirements for Silica in the stone industry. These additional requirements make it a good time to consider adding a dry dust collection system to your stone fabrication shop.
Simple to Use Design
The TEC714 Automatic Dry Dust Collector is made for simple operation. When the motor is running, the dust is vacuumed into the collector. As the air is drawn through the unit, specially designed cloth filtering sleeves allow filtered air to pass through and circulate back out into the shop. However, the dust particles are not allowed through the filters; instead the dust is captured by the filtering sleeves. The dust gets collected into the catch basin at the bottom of dry dust collection booth. All that is needed is for the catch basin that holds the filtered dust to be emptied periodically. Some fabricators choose to empty the catch basin each day. Yet, others decide that the machine needs emptied weekly.
3 Foot Extension Enclosure
This automatic dry dust collector is equipped with an enclosure that measures 3′. The extension adds to further improve the control of the air current that is generated by the vacuum which draws the dust into the collection booth. Another benefit to having the enclosure is that the vacuum efficiency is increased.
Automatically Cleaned Dry Dust Booths
Below is a list of each of the dry dust booths available from Filter Project that are designed to be automatically emptied. There are also manual cleaning dry dust collection systems available as well.
|Dry Dust Collection Systems|
|TEC713||6.33′||3.61′||8.04′||661.39 lbs.||4.02 hp||423.78 ft3/hr||99.9%||67 dB|
|TEC714||9.61′||3.61′||8.04′||859.80 lbs.||5.36 hp||565.03 ft3/hr||99.9%||67 dB|
|TEC715||12.89′||3.61′||8.04′||1,102 lbs.||8.05 hp||1,130.07 ft3/hr||99.9%||67 dB|