CH55 Water Plant for Clarifying

CH55 Water Plant for Clarifying Waste Water

The CH55 Water Plant for Clarifying Waste Water recycles stone fabrication water that is produced by fabrication shops. This recycling system handles various aspects of the water clarification process using a variety of techniques for treating waste water.

The CH55 performs stone waste water recycling as well as sludge collection through the multi-step treatment of wastewater that comes from the granite fabrication process. This granite wastewater clarification system transforms the slurry from the stone fabrication process into clear water that can then be reused in the granite fabrication process. By recycling the water used in the fabrication shop, stone & granite fabricators realize a tremendous savings in the cost of supplying water to a granite or marble fabrication facility.

Slurry Separation

This water clarifying system for granite fabrication makes use of a water filtration cycle to produce clean water from slurry in stone fabrication shops. It does this by separating the slurry into two parts. By filtering out the stone mud and circulating the water through the system, the water is reused repeatedly and stone particles that are filtered out, are stored in a holding bin.

Reducing Water Costs In Stone Fabrication

The CH55 water plant for clarifying waste water uses the processes mentioned above so that stone fabricators can reuse waste water repeatedly. In fact, one fabrication professional reported a 93% reduction in his water utilities after installing a water treatment plant.

• 925 Gallons Per Minute
• 18.04′ Unit Diameter
• 37.73′ Unit Height
• 36,191 Gallon Tank
• AS 800/20P

Multiple Water Treatment Solutions

There are a number of large water clarification solutions available. The following table enumerates the various sizes of water recycling systems provided.