CH60 Water Treatment With Filterpress

CH60 Water Treatment Plant With Filterpress

The CH60 Water Treatment Plant With Filterpress recycles stone water produced by stone fabricators in their fab shops. This recycling system handles the water clarification process in a series of steps. It also uses a variety of water treatment techniques.

The CH60 performs fabrication wastewater recycling as well as mud (sludge) collection. It dos this through the multi-step treatment of wastewater that comes from stone fabrication. This granite wastewater treatment system transforms slurry into clear water that can be reused in the granite fabrication process. By recycling the water used in the fabrication shop, stone & granite fabricators realize a tremendous savings in the cost of supplying water to a granite or marble fabrication facility.

Slurry Separation

This water treatment system for fabrication makes use of a filtration cycle that produces clean water from slurry in stone shops. It does so by separating the slurry into two parts. Then, by filtering out the stone mud and circulating the water through the system, the water is reused repeatedly. During the process, stone particles that are filtered out are stored in a holding bin.

Reducing Water Costs In Stone Fabrication

The CH60 water treatment plant with filterpress uses the process mentioned above to allow stone fabricators to reuse wastewater. One fabrication professional reported a 93% reduction in his water utility bill after installing a treatment plant.

• 1,189 Gallons Per Minute
• 19.69′ Unit Diameter
• 45.93′ Unit Height
• 59,174 Gallon Tank
• AS 800/20P

Multiple Water Treatment Solutions

There are a number of large water clarification solutions available. The following table enumerates the various sizes of water recycling systems provided.

Availability