12.89 Foot Dry Shop Dust Collection System – TEC715 Automatic Cleaning
The TEC715 Automatic Cleaning Dry Shop Dust Collector removes dust from the shop work environment. Get the advantage of removing potentially harmful dust from the work environment in your fabrication shop. Also, use equipment that draws dust particles out of the breathable air. Finally, automatically or manually deposit particles into containers for removal.
This automatic cleaning dry shop dust collector removes air born dust from the fabrication work area. That means it contributes to enhancing fabrication safety. It measures 154.72″ x 43.31″ x 96.46″. Additionally, the TEC715 is constructed with durable and sturdy stainless steel. They also remove 99.99% of the dust particles in the workspace. This is even more important now that OSHA is increasing the requirements for Silica in the stone industry. These additional requirements make it a good time to consider adding a dry dust collection system to your stone fabrication shop.
Simple to Use Design
The TEC715 Dry Dust Collection System is simple to operate. The unit vacuums dust into the collector as the motor runs. Then, specially designed cloth filtering sleeves draw air through the unit. This allows filtered air to pass through and circulate back out into the shop. However, dust particles are not allowed through the filters. Rather, the filtering sleeves capture the dust with the filtering sleeves. Then the catch basin at the bottom of dry dust collection system stores the particles. All that is needed is for the catch basin that holds the filtered dust to be emptied periodically. Some fabricators choose to empty the catch basin each day. Yet, others decide that the machine needs emptied weekly.
3 Foot Extension Enclosure
This dry dust collection system is equipped with an enclosure that measures 3′. Additionally, this extension is added to further improve the control of the air current that is generated by the vacuum which draws the dust into the collection system. Another benefit to having the enclosure is that the vacuum efficiency is increased.
Automatically Cleaned Dry Dust Booths
Below is a list of each of the dry dust booths available from Filter Project that are designed to be automatically emptied. There are also manual cleaning dry dust collectors that are available as well.
| Dry Shop Dust Collection Systems | ||||||||
|---|---|---|---|---|---|---|---|---|
| Dimensions | Technical Specifics | |||||||
| Model | Length | Width | Height | Weight | Power | Suction | Effect | Noise |
| TEC713 | 6.33′ | 3.61′ | 8.04′ | 661.39 lbs. | 4.02 hp | 423.78 ft3/hr | 99.9% | 67 dB |
| TEC714 | 9.61′ | 3.61′ | 8.04′ | 859.80 lbs. | 5.36 hp | 565.03 ft3/hr | 99.9% | 67 dB |
| TEC715 | 12.89′ | 3.61′ | 8.04′ | 1,102 lbs. | 8.05 hp | 1,130.07 ft3/hr | 99.9% | 67 dB |
One thought on “Shop Dust Collection System”
Comments are closed.