CH30 Concrete Slurry Recycling Plant
The CH30 Concrete Slurry Recycling Plant processes wastewater and recycles it to clear water for reuse. This system handles multiple parts of the water clarification process using a variety of water treatment techniques.
The CH30 performs stone wastewater clarification as well as sludge dehydration through the multi-step treatment of wastewater that comes from the granite fabrication process as well as the concrete industry. This stone wastewater system transforms the slurry from stone fabrication into clear water that can then be reused in the granite fabrication process. By recycling the water used in the fabrication shop, stone fabricators realize a tremendous savings in the cost of supplying water to a granite or marble fabrication facility.
Slurry Separation
This water recycling system for granite fabrication makes use of a water filtration cycle to produce clean water from slurry in stone fabrication shops. It does this by separating the slurry into two parts. By filtering out the stone mud and circulating the water through the system, the water is reused repeatedly and stone particles that are filtered out, are stored in a holding bin.
Reducing Water Costs In Stone Fabrication
The CH30 water recycling system for granite fabrication uses the aforementioned processes to allow stone fabricators to reuse wastewater. One fabrication professional reported a 93% reduction in his water utility after installing a water treatment plant.
- 264 Gallons Per Minute
- 9.84′ Unit Diameter
- 27.88′ Unit Height
- 9,510 Gallon Tank
- AS 630/8P Filterpress
Multiple Water Treatment Solutions
There are a number of large water recycling solutions available. The following table enumerates the various sizes of water clarification systems provided.
| Large Plant Technical Specifications | |||||
|---|---|---|---|---|---|
| Model | Rate | Diameter | Total Height | Total Volume | Filter Press |
| CH25 | 211 gpm | 8.20′ | 24.5′ | 5,283 gal. | AS 500/8P |
| CH30 | 264 gpm | 9.84′ | 27.88′ | 9,510 gal. | AS 630/8P |
| CH35 | 396 gpm | 11.48′ | 29.5′ | 13,208 gal. | AS 630/8P |
| CH40 | 528 gpm | 13.12′ | 29.5′ | 17,435 gal. | AS 630/15P |
| CH45 | 660 gpm | 14.76′ | 31.17′ | 22,718 gal. | AS 800/10P |
| CH50 | 792 gpm | 16.40′ | 34.45′ | 29,058 gal. | AS 800/15P |
| CH55 | 925 gpm | 18.04′ | 37.73′ | 36,191 gal. | AS 800/20P |
| CH60 | 1,189 gpm | 19.69′ | 45.93′ | 59,174 gal. | AS 800/20P |
| CH65 | 1,453 gpm | 21.33′ | 49.21′ | 70,798 gal. | AS 1000/20P |
| CH80 | 1,717 gpm | 26.25′ | 57.41′ | 138,162 gal. | AS 1000/20P |