6.33 Foot Manual Cleaning Dry Dust Collector – TEC716
The TEC716 Manual Cleaning Dry Dust Collector removes dust from the shop work environment. Get the advantage of removing potentially harmful dust from the work environment in your fabrication shop through the use of equipment that draws the dust particles out of the breathable air and deposits them into containers for removal; either manually or automatically.
This manual cleaning dry dust collector removes air born dust from the fabrication work area. It measures 76″ x 43 1/4″ x 96 1/2″. Additionally, the TEC716 offers durable and sturdy stainless steel construction. They also remove 99.99% of the dust particles in the workspace. This is even more important now that OSHA is increasing the requirements for Silica in the stone industry. These additional requirements make it a good time to consider adding a dry dust collection system to your stone fabrication shop.
Simple to Use Design
The TEC716 Manual Cleaning Dry Dust Collector features simple operation. The running 4.02 hp motor vacuums the dust into the collector. Then, as the air is drawn through the unit, specially designed cloth filtering sleeves filter air that passed through and circulates back out into the shop. However, the dust particles are not allowed through the filters; instead the dust is captured by the filtering sleeves. The dust gets collected into the catch basin at the bottom of dry dust collection booth. All that is needed is for the catch basin that holds the filtered dust to be emptied periodically. Some fabricators choose to empty the catch basin each day. Yet, others decide that the machine needs emptied weekly.
3 Foot Extension Enclosure
The enclosure on this dry dust collection booth measures 3′. This extension is adds functionality that improves the control of the air current that is generated by the vacuum which draws the dust into the collection booth. Another benefit to having the enclosure is that the vacuum efficiency is increased.
Manually Cleaned Dry Dust Booths
Below is a list of each of the dry dust booths available from Filter Project that are designed to be manually emptied periodically. There are also automatic cleaning dry dust collection systems that are available as well.
|Manual Dry Dust Collectors|
|TEC716||6.33′||3.61′||8.04′||661.39 lbs.||4.02 hp||423.78 ft3/hr||99.9%||67 dB|
|TEC717||9.61′||3.61′||8.04′||859.80 lbs.||5.36 hp||565.03 ft3/hr||99.9%||67 dB|
|TEC718||12.89′||3.61′||8.04′||1,102 lbs.||8.05 hp||1,130.07 ft3/hr||99.9%||67 dB|
Dry Dust Suction Wall